dlm upgrade file is written onto a flash drive. Perform a Forced Firmware Upgrade Using a USB Flash Drive - This is referred to as the "Forced AltBoot" method.dlm contains files for the hard drive as well as firmware files for IME, IIT and each peripheral, the finisher, feeders, and other components. dlm file which are newer than the current files on the hard drive. The machine reads the flash drive and upgrades the machine's firmware (contained as files on the machine's hard drive) with upgrade files from the. dlm file is written onto a USB flash drive. Upgrade Using a USB Flash Drive - This is referred to as the "USB Upgrade" method.dlm and upgrades the machine's firmware (contained as files on the machine's hard drive) with upgrade files from the. The entire process is performed from your computer using a web browser. Typically the flash upgrade file is located on your computer's hard drive. Upgrade Using CentreWare Internet Services (CWIS) (from the printer's webpage) - Use this method to upgrade to a newer version of code.There are three methods for upgrading the printer's firmware: If you have an older copy of the configuration report, a new one must be printed before continuing with the upgrade process. IMPORTANT: Print the configuration report prior to using any of the three methods below to upgrade software. If necessary, click on the link on this window to locate and download the upgrade file onto your computer's hard drive.
Refer to the Related Content below for additional information.įirmware upgrade files are typically obtained from the Xerox Drivers and Downloads website.
IMPORTANT: If you are upgrading your software from to, do not use the upgrade instructions below. Some updates may cause the machine to become non-compliant and cease to work as intended with the environment in which it is installed. WARNING: It is highly recommended to consult with your Network or System Administrator before performing any software (firmware) update. DocuShare Enterprise Content Management.